manualshive.com logo in svg

Freetech P6F128, Руководство пользователя

Поделиться
Скачать
Freetech P6F128 Скачать руководство пользователя страница 18

12 

Mainboard User’s Manual 

 

3.2. Installation 

The P6F128 is designed to fit into a standard ATX form factor chassis.   
The pattern of the mounting holes and the position of the back panel 
connectors meet the ATX system board specification.  The chassis 
comes with various mounting fasteners, which are made of metal or 
plastic.  It is highly recommended to use as many metal fasteners as 
possible to mount the mainboard in the chassis for better grounding. 

 

To install the mainboard you need to install the CPU and DIMM memory 
modules, attach the connectors, and set the correct CPU speed in the 
CMOS setup. 

 
 
 

3.3. Safety Measures 

Computer components and electronic circuit boards can be damaged 
by discharges of static electricity.  Working on computers that are still 
connected to a power supply can be extremely dangerous.  Follow the 
simple guidelines below to avoid damaging your computer: 

 

—

 

Always disconnect the mainboard from the ATX  power supply,   

 

and disconnect the computer from the power outlet whenever you   

 

are working inside the computer case. 

—

 If possible, wear a grounded wrist strap when you are installing 

 

the mainboard or working inside the computer case.   

 

Alternatively, discharge any static electricity by touching the bare   

 

metal chassis of the computer case, or the bare metal body of any   

 

other grounded appliance. 

 

—

 

Hold electronic circuit boards by the edges only.  Do not touch   

 

the components on the board unless it is necessary to do so.  Do   

 

not flex or stress the circuit board. 

 

—

 

Leave each component inside the static-proof packaging that it   

 

ships with until you are ready to use the component for the   

 

installation.

 

 

Содержание P6F128

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды