Freetech P6F128, Руководство пользователя

Страница: 33 / 64

27
Hardware Installation
Refer to the following solutions to reset your CMOS setting:
Solution A
1. Power off the system and disconnect the power cable.
2. Place a shunt to short pin 2 and pin 3 of JP3 for five seconds.
3. Place the shunt back to pin 1 and pin 2 of JP3.
4. Power on the system.
Solution B
If the CPU clock setup is incorrect, you may not be able to boot up.
In this case, follow these instructions:
1. Turn the system off, then on again. The CPU will automatically
boot up using standard parameters.
2. As the system boots, enter BIOS and set up the CPU clock.
Note: If you are unable to enter BIOS setup, turn the system on
and off a few times, or press <INSERT> when booting up
to have the system boot up with standard parameters.
BIOS Flash Protect Jumper
Use this jumper to protect the system BIOS from being accidentally
flashed (updated).
Onboard Speaker Jumper
Use this jumper to enable or disable an onboard.
3.6.6. Auto Power On
After losing AC power, the system will not turn on automatically when the
power comes back unless you set the options in BIOS.
This concludes Chapter 3. Chapter 4 covers the BIOS setup program.