PowerPC e500 Core Family Reference Manual, Rev. 1
E-2
Freescale Semiconductor
Revision History
Chapter 3, “Instruction
Model
”
Scalar and vector embedded floating-point instructions are now considered to be in separate
APUs from the SPE APU.
Added material on double-precision floating-point APU
Notes have been added discouraging use of SPE and embedded floating-point instructions in
PowerQUICC III applications.
Section 3.2.3.1,
“Synchronization
Requirements for
e500-Specific SPRs
”
In
Table 3-4
, all of the
mtspr
to debug register (IAC, DAC, DBCR0, DBCR1, DBSR) instructions
must be followed by a context-synchronizing instruction, but no synchronization is required before
them. Previously, no post-synchronization was shown.
Section 3.3.1.6.1, “mbar
(MO = 1)
”
Added section to provide an EIS architectural definition for
mbar
(MO = 1), which is the classic
PowerPC architecture definition of
eieio.
Section 3.3.1.8.1,
“User-Level Cache
Instructions
”
In
Table 3-26
, the
dcbz
instruction does not take an alignment interrupt if the cache is disabled.
Section 3.5, “Using msync
and mbar to Order Memory
Accesses
”
Added section
Section 3.10, “Instruction
Listing
”
Book E 64-bit instructions were removed from
Table 3-44
.
Section 5.3, “Interrupt
Registers
Deleted MCSR[GL_CI] from
Table 5-4
. Also removed column “Recoverable” in same table
Section 5.7, “Interrupt
Definitions
”
Deleted references to ESR[AP], which is not implemented on the e500.
Chapter 9, “Timer Facilities
” Corrected concatenation order of WPEXT || WP and (FPEXT || FP)
TCR[WPEXT] and TCR[FPEXT], not specified in Book E, are concatenated with TCR[WP] and
TCR[FP]
Chapter 10, “Auxiliary
Processing Units (APUs)
”
Removed coverage of Freescale Book E–defined APUs. See the EREF for more information.
Chapter 11, “L1 Caches
”
Removed references to MEI.
Deleted the ‘D’ from the acronyms for the L1CSR0 bit fields
Section 11.2.2, “L1
Instruction Cache
Organization
”
Added note: On the e500v1, it is possible for multiple entries in the L1 instruction cache to contain
data for the same physical memory location. This error can occur when two different effective
addresses (EA) map to the same physical address and accesses to these two EAs occur within
the same context and relatively close together in time.
This is avoided by not fetching instructions from one physical address through two or more
different EAs within any given context.
Section 11.2.3, “L1 Cache
Parity
”
Added section. .
Section 11.2.4, “Cache
Parity Error Injection
”
Changed name of L1CSR0[PEIE] to CPI and L1CSR1[IPEIE] to ICPI. Added requirement to have
cache parity checking enabled if cache parity injection is enabled.
Table E-1. Revision History
Chapter or Section
Description
Содержание PowerPC e500 Core
