manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 253

Device drivers > USB support > USB Gadget Support > File-backed Storage Gadget.

By default, this option is M.

• CONFIG_USB_G_SERIAL-Build support for ACM gadget. In menuconfig, this

option is available under

Device drivers > USB support > USB Gadget Support > Serial Gadget (with CDC
ACM support).

By default, this option is M.

35.2.4 Programming Interface

This driver implements all the functions that are required by the USB bus protocol to
interface with the i.MX USB ports.

See the BSP API document, for more information.

35.3 System WakeUp

Both host and device connect/disconnect event can be system wakeup source, as well the
device remote wakeup.

But all the wakeup functions depend on the USB PHY power supply, including 1p1, 2p5,
3p3, no power supply, all the wakeup function behavior will be unpredictable.

For host remote wake feature, there is a limitation that our system clock needs a short
time to be stable after resume, if the resume signal sent by the connected device only last
very short time ( less than the time need to make clock stable ), the remote wakeup may
fail. At such case, we should not turn off some clocks to decrease the time needs to be
stable to fix such issue.

35.3.1 USB Wakeup usage

USB wakeup usage is outlined in three procedures: how to enable USB wakeup system,
what kinds of wakeup events USB supports, and how to close USB child device power.

Chapter 35 ARC USB Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

253

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды