manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 169

Chapter 23

Anatop Regulator Driver

23.1 Introduction

The Anatop regulator driver provides the low-level control of the power supply
regulators, and selection of voltage levels.

This device driver makes use of the regulator core driver to access the Anatop hardware
control registers.

23.1.1 Hardware Operation

The Power Management Unit on the die is built to simplify the external power interface
and allow the die to be configured in a power appropriate manner. The power system
consists of the input power sources and their characteristics, the integrated power
transforming and controlling elements, and the final load interconnection and
requirements.

Using seven LDO regulators, the number of external supplies is greatly reduced. If the
backup coin and USB inputs are neglected, the number of external supplies is reduced to
two. Missing from this external supply total are the necessary external supplies to power
the desired memory interface. This will change depending on the type of external
memory selected. Other supplies might also be necessary to supply the voltage to the
different I/O power segments if their I/O voltage needs to be different than what is
provided above.

Some internal regulators can be bypassed, so that external PMIC can supply these power
directly to decrease power numer, such as VDD_SOC and VDD_ARM.

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

169

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды