manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 166

All the related modules are in SoC.

22.2.1 Thermal Driver Software Operation

The thermal driver registers a thermal zone and a cooling device. The structure

thermal_zone_device_ops

 describes the necessary interface that the thermal framework

needs. The framework will call the related thermal zone interface to monitor the SoC
temperature and do the cooling protection.

22.3 Driver Features

The thermal driver supports the following features:

• Thermal zone monitors the SoC temperature.
• Cooling device protects the SoC when the temperature reaches hot or critical points.

22.3.1 Source Code Structure

Table below shows the driver source files available in the directory:

<ltib_dir>/rpm/BUILD/linux/drivers/mxc/thermal

Table 22-1. Thermal Driver Files

File

Description

thermal.c

thermal zone driver source file

cooling.c

cooling device source file

22.3.2 Menu Configuration Options

The following Linux kernel configuration option is provided for this module. To get to
this option, use the ./ltib -c command when located in the <ltib dir>. On the displayed
screen, select Configure the Kernel and exit. When the next screen appears, select the
following options to enable this module:

Device Drivers > MXC support drivers > ANATOP_THERMAL > Thermal Zone

Driver Features

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

166

Freescale Semiconductor, Inc.

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды