manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 111

Chapter 13

HDMI Driver

13.1 Introduction

The High Definition Multimedia Interface (HDMI) driver supports the on-chip
DesignWare HDMI hardware module, which provides the capability to transfer
uncompressed video, audio, and data by using a single cable.

The HDMI driver is divided into four sub-components: A video display device driver that
integrates with the Linux Frame Buffer API, an audio driver that integrates with the
ALSA/SoC sub-system, a CEC driver, and a multi-function device (MFD) driver which
manages the shared software and hardware resources of the HDMI driver.

The HDMI driver supports the following features:

• Integration with the MXC Display Device framework, used for managing display

device connections with the IPU(s)

• HDMI video output up to 1080p60 resolution
• Support for reading EDID information from an HDMI sink device
• Hotplug detection
• Support for CEC
• Automated clock management to minimize power consumption
• Support for system suspend/resume
• HDMI audio playback (2, 4, 6, or 8 channels, 16 bit, for sample rates 32 KHz to 192

KHz)

• IEC audio header information exposed through ALSA by using ‘iecset’ utility

13.1.1 Hardware Operation

The HDMI module receives video data from the Image Processing Unit (IPU), audio data
from the external memory interface, and control data from the CPU, as shown in the
following figure.

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

111

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды