manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 243

• Reception of commands and data and transmission as receive status responses when

functioning as the receiving device associated with a logical channel address

• MediaLB lock detection
• System channel command handling

34.1.3 Modes of Operation

• Normal mode. The MediaLB Device dictates two particular methods:

• Ping-Pong Buffering mode
• Circular Buffering mode (only used on synchronous type transfer)

• Loop-Back test mode

34.1.4 MLB Driver Overview

The MLB driver is designed as a common linux character driver. It implements one
asynchronous and one control channel device with Ping-Pong buffering operation mode.
The supported frame rates are 256, 512, and 1024Fs. The MLB driver uses common read/
write interfaces to receive/send packets and uses the ioctl interface to configure the MLB
device module.

34.2 MLB Driver

Functionality of the MLB driver is described in supported features, MLB driver
architecture, and software operation.

34.2.1 Supported Features

• 256Fs, 512Fs and 1024Fs frame rates
• Asynchronous and control channel types
• The following configurations to MLB device module:

• Frame rate
• Device address
• Channel address

• MLB channel exception get interface. All the channel exceptions are sent and

handled by the application.

Chapter 34 Media Local Bus Driver

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

Freescale Semiconductor, Inc.

243

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды