manualshive.com logo in svg

Freescale Semiconductor i.MX 6DualLite, Справочное руководство

Поделиться
Скачать
Freescale Semiconductor i.MX 6DualLite Скачать руководство пользователя страница 246

Set the corresponding channel address [8:1] bits. This ioctl combines both tx and rx
channel address, the argument format is: tx_ca[8:1] << 16 | rx_ca[8:1]

MLB_CHAN_STARTUP

Startup the corresponding type of channel for transmit and reception.

MLB_CHAN_SHUTDOWN

Shutdown the corresponding type of channel.

MLB_CHAN_GETEVENT

Argument type: unsigned long

Get exception event from MLB device module, the event is defined as a set of
enumeration:

MLB_EVT_TX_PROTO_ERR_CUR

MLB_EVT_TX_BRK_DETECT_CUR

MLB_EVT_RX_PROTO_ERR_CUR

MLB_EVT_RX_BRK_DETECT_CUR

34.3 Driver Files

Table below lists the source file associated with the MLB driver that are found in the
directory <ltib_dir>/rpm/BUILD/linux/drivers/mxc/mlb/.

Table 34-1. MLB Driver Source File List

File

Description

mxc_mlb.c

Source file for MLB driver

include/linux/mxc_mlb.h

Include file for MLB driver

34.4 Menu Configuration Options

To get to the MediaLB configuration, use the command ./ltib -c when located in the <ltib
dir>. In the screen, select Configure Kernel, exit, and a new screen appears. This option
is available under:

• Device Drivers > MXC support drivers > MXC Media Local Bus Driver > MLB

support.

Driver Files

i.MX 6Solo/6DualLite Linux Reference Manual, Rev. L3.0.35_4.1.0, 09/2013

246

Freescale Semiconductor, Inc.

Содержание i.MX 6DualLite










































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды