FreeFlight 2101 I/O PLUS, Руководство по установке и проверке

Страница: 65 / 152

Page 3-9
Revision E
May 31, 2006
FreeFlight 2101 I/O Approach Plus GPS Navigation System
3.2.2.6 Set Advisory Messages
Most message displays can be configured to one of the following settings:
Off Disables display of the message
On Enables display of the message when appropriate, but keeps messages in the queue until selected by
the user for display
Pop-Up Enables display of the message automatically when appropriate. The message may require pilot
acknowledgment to remove the message by pressing the MSG key, or it may be an auto Pop-up/Pop-
down message as indicated below.
Most messages will function according to the chosen settings for all phases of flight, except as noted in
Table 3-5 for Approaches. These user-selectable parameters will affect the timing for various message types.
Access the Installation Setup and follow these steps to change the configuration of the advisory messages:
1. Rotate the small, inner selector knob to display ADVISORY MESSAGES.
TURN OUTER KNOB
2. Rotate the large, outer knob to sequence through each of the Advisory messages categories listed in
Tables 3-5 and 3-6.
3. At each category, press to cause the editable field to flash.
4. Rotate the small, inner knob to change the setting.
5. Press when the setting is correct.
Table 3-5 Approach Message Options
Configurable
Parameter
Description Available
Settings
Default
Setting
WPT Arrival/Turn Adv
Lead Time
Pop-Up/Down Message
Display Time
Sets the lead time for Message and
Annunciator advisory of aircraft arrival
at the Waypoint or Turn Anticipation
Point
Sets the time that an Auto
Pop-Up/Pop-down message is
displayed
3 to 60 sec
1 to 9 sec
10 sec
3 sec