
91
GB
5
Mac OS X: Installing a USB printer
To install a USB printer, connect the printer to one of the USB host ports on the FSG.
Check to make sure the FSG is on. Then turn the printer on.
1. Connect a USB printer to the FSG.
2. Open the FSG Configuration page and check whether the printer was detected
under 'Information' -> 'USB'.
3. Open 'System preferences' -> 'Printing & Faxing'.
4. Click '+' to add a new printer.
5. The 'Printer Browser' opens. Select 'IP printer' as the printer type and select the
following settings:
Protocol:
HP Jet Direct-Socket
Address:
192.168.1.1:9100 (replace 192.168.1.1 with the IP address that
you set for your FSG)
Queue name:
You may leave this field blank.
A list of available printer drivers is now compiled.
Setting up a printer
Содержание Storage Gateway NETWORK HARD DRIVE
Страница 10: ...10 Freecom Storage Gateway FSG GB...