background image

p. 9

AVM Around Vehicle Monitoring System Installation Guide

 

inView 360 HD Installation Guide

© Safe Fleet | July 2020 | All rights reserved 

Document Number: XE-SNB100-C00-INSTALLPM-R0A

Camera Placement Considerations for Specially Shaped Vehicles

Vehicles that have special compartments or equipment in the middle, such as fire trucks, might require special 

consideration for mounting cameras� Because of the accessories and equipment that is usually added to emergency 

vehicles, mounting the cameras high up and in the center might not be an option� The added equipment might block a 

camera’s field of view. 

This is a situation where you should consider mounting the camera slightly off center�  

Vehicle Center

In these illustrations, you can see that the cameras have been mounted slightly off 

center to compensate for elements on the vehicle body that could block the camera’s 

field of view. 

 NOTE: Spacing the Calibration Pads

These images are just representations of camera placement� The orange areas do 

not accurately portray the actual camera field of view. Please refer to your camera 

specifications for a more accurate representation of the cameras’ fields of view. 

 NOTE: Images are for illustration only

Содержание InView 360 HD AVM




















Отзывы: