Franzis PE01, Инструкция по эксплуатации

Страница: 14 / 20

ASSEMBLING THE ENGINE ASSEMBLING THE ENGINE
26 27
Step 23. Cam drive sprocket –
right side
Fit the crankshaft sprocket B (11) to the metal
pin, followed by the valve timing tool.
Step 24. Cam belt – right side
Install the second cam belt and idler pulley.
Step 21. Cam belt cover –
left side
Remove the valve timing tool,
and the timing alignment pin
from the lower sprocket.
Fit the cam belt tunnel cover
(61) and secure with three
screws.
Step 22. Distributor drive gears
Install the distributor drive bevel gears. Fit the
smaller crankshaft gear C (76) first - it has a slot
that engages with the rib on the crankshaft.
When fitting the larger gear (69), note the round
groove in one side. To achieve correct ignition
timing, this gear MUST be installed with the flat
section facing downwards as shown. Slide a
timing pin under the gear and into the bracket
in the front of the crankcase to ensure the gear
is correctly positioned.