Franzis PE01, Инструкция по эксплуатации

Страница: 9 / 20

ASSEMBLING THE ENGINE ASSEMBLING THE ENGINE
16 17
Step 6. Crankcase rear
Slide the crankcase rear
(56) in to the upper
crankcase. There is a
rib in the plate that fits
into a corresponding
slot in the upper
crankcase - refer to
the inset image (the
crankshaft and drive
gear have been
removed for clarity).
Step 7. Crankcase assembly
Fit the lower crankcase (48)
to the upper crankcase and
secure with seven screws.
Step 4. Crankshaft
assembly
Place the upper crankcase
(47) upside down on a table.
Hold the piston/crankshaft assembly,
and lower it on to the crankcase.
Step 5. Cylinder barrels
Attach the cylinder barrels (49) to the upper
crankcase. Carefully slide the pistons into each
set of barrels and then lower the barrels into the
crankcase. Ensure the barrels are the right
way up - note that the barrel for the
middle piston has a rib that fits into
a corresponding slot in the upper
crankcase.