11
The current function will flash on the Function Display for 7 seconds and the default
cooking temperature assigned to this function will appear on the temperature display
(Note: For some functions, a temperature control is not possible and the temperature
display is blank).
The
is steady on the status display, whereas
is flashing, indicating that
you are ready to cook but not started yet.
CHANGING THE ASSIGNED DEFAULT OVEN TEMPERATURE:
The Temperature Setting on the Temperature Display might be changed by touching
the button- the Temperature Display starts flashing- and setting the desired
value using or in 5 degree intervals.
(!)Note: If you want to replace the default temperature setting for this function with
this adjusted temperature permanently, touch for approximately 5 seconds, until
a buzzer tone is heard. The factory set default temperature for this function is now
permanently changed.
MANUAL COOKING:
Once a function is selected, touching the
key, initiates cooking with a
temperature setting on the temperature display (if any).
disapears , and the
time passed in cooking starts to be displayed on the timer/meat probe display.
Cooking will continue until it is ended by the user manually ( see: to pause,edit or
end cooking) or the maximum allowed cooking time, depending on the selected
cooking temperature, has passed, as listed below:
050-120 C 10h
121-200 C 6h
201-250 C 3h
In half and full automatic cooking, as described later, cooking is ended automatically
depending on the parameters entered by the user before initiating cooking (by
touching
)
TO PAUSE, EDIT or END COOKING:
Touching
during cooking, interrupts the cooking progress and
starts flashing, whereas other portions of the display remain the same. All oven
heating elements and turbo fan are disabled temporarily. Cooking is paused.
To end cooking, touch
once again, all cooking related indications on the display
disappear. The temperature display will indicate the residual heat ,if any ( see:
Residual Heat Indication ).
