Fracarro 3DG-4ASI-4T, Руководство по эксплуатации

Страница: 9 / 28

9
English
5.1.3 ASI OUTPUT:
to configure the ASI output signal from the 3DG 4ASI 4T module.
OUTPUT FLOWCHART
- ASI 1, ASI 2
• ENABLE: enable or disable the selected output
• BITRATE: shows the measures of the bitrate in the multiplex of output programs.
• BITRATE USED: indicates the bitrate used. This parameter refers to the total measure of all the programs
added to the output program list.
• BITRATE AVAILABLE: indicates the available bitrate. This parameter refers to the total measure of the
available output bitrates after inserting one or more programs.
• BR PEAK USED: measures the maximum peak bitrate (bit/s) used by the programs in the output MUX.
• BR PEAK AVAILABLE: measures the total peak bitrate (bit/s) available in the output MUX.
• RESET BR PEAK: to reset the peaks to the initial values calculated according to the digital modulation
settings. After a bitrate overflow, when the peaks have reached their limit value, this function has to be used.
• OVERFLOW ALARM: manages the bitrate overflow alarms.
• ALARM STATUS: shows if a bitrate overflow has occurred.
• RESET ALARM: cancels the overflow alarm. With this function the product is reset on the standard
working conditions (the red LED is turned off).
• ENABLE: to enable (set to ON) the overflow alarm signal function. If the function is set on OFF the option
is disabled.