6
GENERAL SAFETY RULES
1.
Keep
the work area clean. Work areas and cluttered benches invite injuries.
2.
Avoid
a dangerous environment.
Do not
expose
power tools to rain and do not use in damp or wet locations.
Keep
the work area well lit.
Do not use
the tool in presence of flammable gases or liquids.
3.
Connect
dust extraction equipment. If means are provided for the collection of dust, ensure that these devices are
connected and properly used.
4.
Keep
visitors and children away. All children and visitors should be kept a safe distance from the work area.
5.
Protect
yourself
from electric shocks. Avoid contact with earthed surfaces.
6.
Do not
mistreat the power cord.
Never
pull the power cord to disconnect the plug. Keep the power cord away from
heat, oil and sharp edges.
7.
Use
extension cords intended for outdoor use. When the tool is used outdoors, use only extension cords intended
for outdoor and bearing indications to this effect.
8. Be aware.
Observe
what you do, use common sense. Do not use the tool when you are tired.
9.
Do not use
the machine if you are under the influence of medication, alcohol or drugs.
10.
Avoid
accidental starting. Make sure the switch is in the “Off” position before plugging in.
11.
Dress
properly. No loose clothing or jewellery that can be caught in moving parts. Non-slip footwear is
recommended for outdoor work. Keep long hair covered or tied up.
12.
Always use personal protection devices
: wear safety glasses. Wear a mask if operation is dusty. Wear
hearing protection or earplugs in noisy areas. Wear protective gloves when handling parts with sharp edges.
13.
Do not
lean over the tool. Keep your balance at all times.
14.
Seek the advice
of an expert if you are not familiar with the use of this machine.
15.
Store
tools when not in use. They should be stored in dry, locked storage out of reach of children.
16.
Do not force
the machine. It will work better and safer when used in the way it was designed.
17.
Use
the right tool. Do not force a small tool to do the job of a heavy duty tool. For example, do not use a circular
saw to cut branches or logs.
18.
Secure
what you are working on. Where possible, use clamps or a vice. It's safer than using your hands.
19.
Keep
tools in good condition. Keep tools sharp and clean in order to get the best and safest performance.
Follow
instructions
for lubricating and changing accessories. Regularly check the cable and replace if damaged. Keep
handles dry, clean and free of oil and grease.
Содержание F31-462A
