Fox F31-462A, Инструкция по эксплуатации

Страница: 11 / 32

11
CONNECTING THE SAW
ELECTRICAL CONNECTIONS
ELECTRICAL CONNECTION
Your machine has a precision built electric motor. It must be connected to a power supply of 230V, 50 Hz. If your
machine does not operate when plugged into an outlet, double check the power supply.
EARTHING INSTRUCTIONS
In case of malfunction or short circuit, grounding provides a path of least resistance for electric current to reduce
the risk of electric shock. This tool is equipped with an electric cord having an earthing conductor and a grounding
plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all
local codes and regulations.
Do not modify the plug provided. If it does not fit into the outlet, have a proper outlet installed by a qualified
electrician. Improper connection of the conductor grounded equipment can result in a risk of electric shock. The
conductor with insulation is green with or without yellow stripes is the conductor of grounding. If the repair or
replacement of the power cord is necessary, do not connect the grounding conductor to a live terminal.
If the earthing instructions are not completely understood, check with a qualified electrician or a person responsible
for maintenance, or if there is doubt properly grounding the tool.
If the power cable is damaged, it must be replaced by the manufacturer, after sales service or similarly qualified
persons in order to avoid a hazard. Do not operate the tool with a damaged power cable.
This tool is intended for use on a circuit with a wall outlet. It also has an earthing pin.