VR800 / VR800Z
21
3)
Using 4 x screws (B 3 x 5 BZn), fix the internal drive/bracket to the VR-800.
Adjust the tightening position of screws to the internal drive/bracket and to the VR-800 so that screws are not
bothered from each other.
4)
Connect the J12 (40-pin flat cable) and W1 (4-pin cable) from the MAIN PCB assy to the internal drive connectors
In order to connect pins straight, twist the cable as shown below.
J12
W1
4)
Tighten 6 x screws (BBT 3 x 8 BZn) fixing the bottom panel of the VR800.
Содержание VR800
Страница 1: ...VR800 VR800Z Service Manual Model Digital Multitrack Recorder ...
Страница 47: ...VR800 VR800Z 47 NOTE ...