Fostex VR800, Руководство по обслуживанию

Страница: 11 / 48

VR800 / VR800Z
11
4-4. Display/Button Test
This mode tests if all the segments on the LCD display, LEDs
and buttons (switches) on the VR800 top panel are correctly
working or not.
To execute this test, press the [EXECUTE/YES] key while
“?” is blinking.
If the VR800 is in a normal condition, all the segments on
the LCD display will be lit solid and all the LEDs on the top
panel will start blinking.
If the VR800 is not in a normal condition, faulty segments
on the LCD display and/or LEDs on the top panel will remain
unlit.
In this condition, if the [EXECUTE/YES] key is pressed one
more time, the Button Test can be executed.
The Button Test checks if each key/button and jog dial are
working properly or not. The display on the left indicates
that the [RECORD] button is pressed and held down. (“K”
stands for the Key and “J” the Jog dial.)
The display on the left indicates the condition when the jog
dial is turned C.W.
The table below shows the relationship between the key/
button/jog dial and the corresponding numbers appear on the
LCD display.
In order to quit the Button Test, turn the jog dial C.W. or C.C.W.
further after “J_20” or “J-19” is displayed respectively.
: blinking
?
Key/Button/Jog Dial No. Key/Button/Jog Dial No. Key/Button/Jog Dial No.
RECORD K01 STORE K13 EXECUTE / YES K25
STOP K02 EDIT K14 RECORD TRACK 1 K26
PLAY K03 UNDO / REDO K15 RECORD TRACK 2 K27
REWIND K04 DISP SEL K16 RECORD TRACK 3 K28
F FWD K05 SETUP K17 RECORD TRACK 4 K29
SHIFT K06 AUTO RTN START K18 RECORD TRACK 5 K30
VARI PITCH / P.EDIT K07 AUTO PUNCH IN K19 RECORD TRACK 6 K31
AUTO RTN / PLAY K08 AUTO PUNCH OUT K20 RECORD TRACK 7 K32
LOCATE / LOC MEM K09 AUTO RTN END K21 RECORD TRACK 8 K33
TIME BASE SEL K10 CLIPBOARD IN K22
SCRUB K11 CLIPBOARD OUT K23 JOG DIAL (C.W.) J 00 ~ 20
HOLD K12 EXIT / NO / EJECT K24 JOG DIAL (C.C.W.) J -00 ~ -19