Fortinet FortiGate FortiGate-60M, Руководство администратора

Страница: 176 / 376

176
01-28007-0144-20041217 Fortinet Inc.
CLI configuration Router
virtual-link command keywords and variables
Keywords and
variables Description Default Availability
authentication
{md5 | none |
text}
Set the authentication type.
Use the
authentication
keyword
to define the authentication used for
OSPF packets sent and received
over this virtual link. If you select
none
, no authentication is used. If
you select
text
, the authentication
key is sent as plain text. If you select
md5
, an authentication key is used to
generate an MD5 hash.
Both text mode and MD5 mode only
guarantee the authenticity of the
OSPF packet, not the confidentiality
of the information in the packet.
In text mode the key is sent in clear
text over the network. Text mode is
usually used only to prevent network
problems that can occur if an
unwanted or misconfigured router is
mistakenly added to the area.
none
All models.
authentication-key
<password_str>
Enter the password to use for
text
authentication.
The
authentication-key
must
be the same on both ends of the
virtual link.
The maximum length for the
authentication-key
is 15
characters.
No
default.
All models.
authentication
must be set to
text
.
dead-interval
<seconds_integer>
The time, in seconds, to wait for a
hello packet before declaring a
router down. The value of the
dead-
interval
should be four times the
value of the
hello-interval
.
Both ends of the virtual link must use
the same value for
dead-
interval
.
The valid range for
seconds_integer
is 1 to 65535.
40
All models.
hello-interval
<seconds_integer>
The time, in seconds, between hello
packets.
Both ends of the virtual link must use
the same value for
hello-
interval
.
The valid range for
seconds_integer
is 1 to 65535.
10
All models.
md5-key
<id_integer><key_s
tr>
Enter the key ID and password to
use for
MD5
authentication. Both
ends of the virtual link must use the
same key ID and key.
The valid range for
id_integer
is 1
to 255.
key_str
is an alphanumeric
string of up to 16 characters.
No
default.
All models.
authentication
must be set to
md5
.
peer
<address_ipv4>
The router id of the remote ABR.
0.0.0.0 is not allowed. No
default.
All models.