Chassis hardware information
FortiGate-7060E Chassis
FPM03, FPM04, FPM05, and FPM06 (IPMB addresses 0x86, 0x88, 0x8A, and 0x8C) are the FPM processor
modules in slots 3 to 6. These worker modules process sessions distributed to them by the FIM modules.
FPM modules include NP6 processors to offload sessions from the FPM CPU and CP9 processors that accelerate
content processing.
Chassis hardware information
This section introduces FortiGate-7060E hardware components and accessories including power requirements
and FIM and FPM modules that can be installed in the chassis.
Shipping components
The FortiGate-7060E chassis ships pre-assembled with the following components:
l
The 8U FortiGate-7060E chassis
l
Two FIM modules
l
Up to four FPM modules
l
Two management modules in the front of the chassis. (Management modules are not field replacable. If a
management module fails you must RMA the chassis. The chassis will continue to operate with one or no operating
management modules.)
l
Four Power Supply Units (PSUs) installed in the front of the chassis
l
Three cooling fan trays installed in the back of the chassis
l
One protective front panel installed in the chassis to protect internal chassis components. This panel must be
removed before installing FIM and FPM modules.
l
Four power cords with C15 power connectors
l
Four power cord management clamps
l
One set of 4-post rack mounting components
l
One set of 2-post rack mounting components
l
One pair of cable management side brackets
l
Two front mounting brackets
l
Twenty M4x6 flat-head screws
l
Six M4x8 large head pan-head screws
l
Six rubber feet
l
Two console cables
l
One RJ-45 Ethernet cable
Optional accessories and replacement parts
The following optional accessories can be ordered separately:
SKU
Description
FG-7060E-FAN
FortiGate-7060E fan tray.
9
FortiGate-7060E System Guide
Fortinet Technologies Inc.
