FortiGate-7060E Management Modules
Rebooting a chassis module from the SMC SDI CLI
Chassis slot number
Name
IPMB Address (FRUID)
3
FPM3
0x86
1
FIM1
0x82
2
FIM2
0x84
4
FPM4
0x88
6
FPM6
0x8C
You can use the IPMB address or chassis slot number to reference a chassis slot when entering commands in the
management module CLI. For example, enter either of the following commands to display sensor readings for
the FIM module in slot 2:
sensor 0x84
sensor 2
When command syntax descriptions in this chapter include the <slot> variable you can replace it with a slot
number (1 to 6) or an IPMB address number (0x82 to 0x8C)
Rebooting a chassis module from the SMC SDI CLI
A common use of the SMC SDI CLI is being able to remotely reboot a FIM or FPM module.
From any SMC SDI CLI use the following command to reboot the module in slot 3:
mc reset 3 warm
Use the following command to power off the module in slot 4:
fru deactivate 4
Use the following command to power on the FIM module in slot 2 (IPMI address 0x84):
fru activate 0x84
Use the following IPMI command to reset the module SMC to reboot the module in slot 3:
sudo ipmitool -I lanplus -H 10.160.19.30 -k gkey -U admin -P admin -t 0x86 mc reset warm
Use the following IPMI command to power off the module in slot 4:
sudo ipmitool -I lanplus -H 10.160.19.30 -k gkey -U admin -P admin -t 0x88 picmg
deactivate 0
Use the following IPMI command to power on the FIM module in slot 2 (IPMI address 0x84):
sudo ipmitool -I lanplus -H 10.160.19.30 -k gkey -U admin -P admin -t 0x84 picmg activate
0
Comlog
All module SMCs include a comlog system for writing and saving console log messages. When enabled, the
comlog saves log messages in a local comlog file. Log messages include all local host console messages
including BIOS boot up messages. In the comlog these messages include the following headers:
FortiGate-7060E System Guide
Fortinet Technologies Inc.
32
