Comlog
FortiGate-7060E Management Modules
Header
Cause
\n--- COMLOG SYSTEM BOOT: YYYY/MM/DD hh:mm:ss ---\n
The module is starting up after being powered on
or reset.
\n--- COMLOG DISABLED: YYYY/MM/DD hh:mm:ss ---\n
Logging is disabled.
\n--- COMLOG ENABLED: YYYY/MM/DD hh:mm:ss ---\n
Logging is enabled
\n--- COMLOG TIME: YYYY/MM/DD hh:mm:ss ---\n
This message is written every hour when the
module is powered on and logging is enabled.
The following comlog-related CLI commands are available:
Description
SMC CLI Commands
IPMI commands
Display comlog information.
Available on the passive
module.
comlog getinfo
Status
Disabled
COM
Speed 9600
Storage Size
0x00400000
Log Start
0x00000000
Log End
0x00000C37
Log Size
3127 Bytes
Display a module's comlog.
Available on the passive
module.
comlog getinfo <slot>
comlog print <slot>
fortinetoem comlog getinfo
fortinetoem comlog print
Clear a module's comlog. Either
by resetting the a comlog start
location in flash (reset_loc) or
erasing all of the flash storage
(chip_erase). Available on the
passive module.
comlog clear [reset_loc]
[chip_erase]
fortinetoem comlog clear
Disable a module's comlog.
Available on the passive
module.
comlog disable
fortinetoem comlog clear
Enable comlog. Available on
the passive module.
comlog enable
fortinetoem comlog clear
Set comlog baud rate.
<speed>
can be 9600, 19200,
38400,57600, 115200, or
expressed as level 1 to 4.
Available on the passive
module.
comlog setbaud <speed>
fortinetoem comlog setbaud
<speed>
33
FortiGate-7060E System Guide
Fortinet Technologies Inc.
