Settings Overview
Page 15
FortiFone User Guide
Display
Operator mode
When enabled, the Operator mode will change the homescreen of the phone to show four
columns of appearance keys. If enabled, you can return to the regular homescreen of the phone
by tapping the
Collapse
button in the bottom right-hand corner of the screen. Pressing the
Home
button below the screen will return you to the Operator mode.
Screen saver
A screen saver can be enabled that can either turn off the LCD when the phone is not in use or
display the time on a black background. This section has three settings:
•
Disable
— no screen saver set, LCD screen will always be on.
•
LCD power off
— turns off the LCD display of the phone after a specified amount of time.
•
Start screen saver
— enables the screen saver through a series of settings:
— Timeout to sleep — set the length of time the phone waits until it goes into sleep mode.
— ScreenSaver after active — enables the screen saver timeout.
— Timeout to ScreenSaver — set the length of time the phone waits for the screen saver
to start.
— Daydream — choose the application to use as the screen saver.
Power indicator
The power light in the upper right-hand corner can be used to alert you of multiple items or
alternately, be completely disabled.
•
Turn off Power Light
— enable this to turn off all Power Light notifications.
•
Enable Messaging indicator
— the power light will flash for 1000 ms On and 1000 ms Off to
indicate that an SMS message has been received.
•
Enable Voicemail indicator
— the power light will flash for 1000 ms On and 1000 ms Off to
indicate that new voicemail messages have been received.
•
Enable Missed Call Indicator
— the power light will flash for 400 ms On and 400 ms Off to
indicate that there are calls that have been missed.
Desktop
Here you can enable the ability to press and hold application icons in order to create shortcuts
to them on the desktop.
Tone
Tone
The
Tone
section gives you a wide variety of tones to choose from for the following:
•
Phone ringtone
— select the tone to use when an incoming call is received. Note: this setting
is overridden by selections made under
Settings > Call > Account > Select Line Tone
.
•
Notification ringtone
— select the tone to use when receiving a new notification.
•
Dialpad touch tones
— enable/disable the tones heard while dialing.
•
Touch sounds
— enable/disable touch sounds.
Содержание FON-670i
Страница 1: ...FortiFone User Guide for FON 670i and FON 675i...
Страница 6: ......
Страница 34: ......