Fortinet FON-670i, Руководство пользователя

Страница: 18 / 34

Settings Overview Page 12 FortiFone User Guide
number you would like to transfer to and press Send . Once a connection has been made,
press Transfer again to transfer the call. In order to use this feature you will need to enable
Call waiting and Call transfer first.
• Enable Auto on Hook — enable this to determine how long the phone waits before returning
to the screen prior to making or receiving a call, after the call has ended.
• Auto on Hook Time — the length of time the phone waits in seconds for the Auto on Hook
feature.
• Enable 3-way Conference — enable this for the ability to perform 3 way conference calls.
• Enable call completion — when enabled and the callee is busy, the SIP server will check the
callee status in intervals. Once the callee is idle, the SIP server will send a NOTIFY message
to the caller to redial.
• Enable auto redial — A prompt will be displayed on the screen asking if you would like to try
and redial a busy number.
• Auto redial interval — the amount of time to wait between auto redial attempts.
• Auto redial times — the amount of times the phone should try to redial a busy number.
• Enable intercom — when enabled, the phone will accept intercom calls that activate the
speaker of the phone.
• Enable intercom mute — mute the phone when an intercom call is received.
• Enable intercom tone — play a tone when an intercom call is received.
• Enable intercom barge — when enabled and on a call, the intercom call with be
automatically answered. If the current call is also an intercom call, the second intercom call
will be rejected.
• Update dial call — when enabled the phone will update the peer display name based upon
the 200 OK packet.
• Enable Multi Line — when enabled, the phone will be able to handle up to 10 calls. If
disabled, the phone will be able to handle up to 2 calls at once.
• Active URI Limit IP — enter the IP address of the server for the Action URL messages
described below.
• Memory Key to BXfer — select how you would like the transfer key to operate with one of the
following choices:
— Off
— Blind Transfer
— Attended Transfer
— New Call
• Enable CallLog — enables the phone call records.
• Ring from headset — when enabled the phone will play ringtone to the headset.
• Enable Hide Local Area Code — when enabled, the local area code will not be displayed on
received calls.
• Auto Hold — when enabled, the phone will automatically put a current call on hold when
accepting a second call.
• Coutry code — enter the country code of your location.
• Area code — enter the local area code.
• Call Waiting Code — select the SIP message response of either 180 or 182 for Call Waiting.
• Default EXT Line — select which account (from 1-6) will be the default account used by the
phone.
• Default Dial Mode — choose between sending Audio or Video as the default call mode.