Installation and
Operating Manual
Forno Bravo
Casa2G and Premio2G
Residential Modular Refractory Ovens
41
©Forno Bravo, LLC 2019. All Rights Reserved.
Ver. 2.0
Photo 5
Make all the connections from the valve (photo 6) to
the burner, as follows:
Photo 6
A. Arrival of gas to the pipe; a type approved flexible
gas pipe Ø 1/2" (12.7mm) can be used.
B. Outlet of copper pipe Ø 6 that carries gas to the
pilot flame.
C. Thermocouple inlet; be careful not to over tighten
the nut.
D. Outlet of copper pipe Ø 12 that carries gas to the
main burner.
Insert the burner ignition cable in its insulator
(photos 7-8).
Photo 7
Photo 8
Vent the pipe and check that it is completely airtight.