iii
INTRODUCTION
0.1
PROPRIETARY NOTICE
0.2
SAFETY AWARENESS
0.3
This manual serves as a guideline to service technicians for the basic installation, setup, and troubleshooting
of the IDDX Flame Amplifier, manufactured by Forney Corporation: 16479 Dallas Parkway, Suite 600,
Addison, TX 75001.
All personnel should become thoroughly familiar with the contents of this manual prior to installing,
setting-up and servicing this equipment. Because it is virtually impossible to cover every situation that
might occur during operation and maintenance of the equipment described in this publication, personnel
are expected to use good engineering judgment when confronted with situations that are not specifically
mentioned herein.
The contents of this publication are proprietary data of Forney Corporation. Reproduction or use of any
part of the publication for purposes other than the support of the equipment for which it is published is
permissible only if expressly authorized in writing by Forney.
Safety is YOUR responsibility and must always be primary concern. The guidelines covered in this
manual will greatly improve your ability to safely install and maintain this equipment. It is the equipment
owner’s responsibility to ensure that the concerned personnel fully understand and abide by all site-
specific Health, Safety, and Quality protocols. Safety summaries and procedures can never replace good
common sense!
IDDX Flame Detector Amplifier Manual
372001-24 Rev. A
