20
port, size and position of the components will only function properly if the system is intended for
use with disc brakes.
• It is important to cross-check your frame and fork manufacturers’ manuals on all the parts critical
to the braking system and verify that the torque ratings match the ratings found in this manual.
In the case of inconsistency of the values, do NOT install the braking system.
• Make sure the bicycle is clean before doing any maintenance on the brakes.
• Never install the brakes using adapters or supports supplied by other manufacturers. Doing so
will void the warranty and release FORMULA SRL of liability. Only use original FORMULA SRL
products.
• Do NOT let brake fluid or other oils or grease used for lubricating the bicycle come into contact
with the disc rotors. If this does happen, clean the discs using isopropyl alcohol ONLY.
• Do NOT let brake fluid or lubricants come into contact with the brake pads. If this does happen,
the brake pads will be contaminated and must be replaced before the next use.
• Only use DOT 4 brake fluid from a new bottle. NEVER use old fluid, or fluid that has been bled
out of the system. Old fluid can contain water and this will compromise the performance and
function of the system.
• WARNING: All FORMULA brake systems requires a break in (bedding in) period to
obtain top performance. We recommend running the bike on a flat surface at a speed
of 30 Km/h and braking it at least 50 times allowing it to come to a full stop (taking
the required precautions) before considering the system broken in and fully efficient.
• The efficiency of the brakes depends on many factors which FORMULA SRL has no control over.
These include the speed of the bike, the wheel-terrain contact, the brake lever application force,
the correct installation and maintenance of the brakes, the hydraulic brake fluid, the levers, the
brake shoes or pads, the condition of the bike, the weight of the rider, the correct braking tech-
nique, the weather conditions, the type and conditions of the terrain, and many other factors.
NOTE ON HEALTH AND ENVIRONMENT
FORMULA s.r.l. declares that the braking system and the spare parts it deals with are
manufactured with asbestos-free friction material. They are also in compliance with regu-
lations and laws in force concerning health and environmental protection.
Do not inhale the powder they produce and carefully wash your hands before eating
and drinking.
ENVIRONMENTAL NOTE
In order to safeguard the environment, please refer to these simple instructions for the correct
disposal of FORMULA SRL products.
1) The packaging material does not require special disposal precautions because it is not
considered dangerous; we urge you to recycli paper and plastic.
2) It is also recommended to recycle of the metal parts after use.
3) In regards to the brake liquid DOT4, it is recommended to follow the instructions in the
safety sheet available from: http://support.FORMULA-brake.com.
In the case of all three items mentioned above, it is recommended to recycle of the waste
following the national directives through specialized companies.
