- 24 -
11.DISASSEMBLY AND DEMOLITION
11.1.
Disassembly
In case the machine has to moved or disposed of, it is necessary to disassemble the machine first. The vari-
ous phases are:
disconnect the power supply;
empty the boiler;
wash the machine;
empty the distillate collection tank(s) if present;
disconnect the machine from the various supplies;
disconnect the various blocks of the machine (if present).
11.2.
Demolition
In case the machine has to be disposed of, it is necessary to follow the instructions as to minimize the envi-
ronmental impact of the waste disposal.
Do as follows:
Recover the heating fluid of the machine.
-
The heating fluid can be reused after being recovered.
-
Store the oil in a jerry can or drum and dispose of it separately using specialized waste disposal
for oil.
Remove and dispose separately the battery of the PLC (if present).
-
Batteries of the HMI or the PLC are special waste and have to be disposed of following the ap-
propriate procedures.
-
Batteries have to be stored in a cool and dry place (temperature between 20-25 °C, relative hu-
midity 40-60%), away from heating sources and flammable material.
-
Do not try to recharge the battery: it can overheat or explode.
-
Do not open, puncture or break the battery: risk of explosion or contact with flammable, toxic
substances.
-
Do not burn batteries or expose them to high temperatures: risk of explosion.
-
Do not short-circuit the batteries: risk over overheating.
-
Do not throw away batteries with normal waste.
Remove and destroy CE marking tag;
Dispose of the structure of the machine.
-
Once the fluids and batteries are removed from the machine, use the proper channels to dispose
of the metallic parts of the machine
Содержание Drester 120
Страница 1: ...INSTR 11213 1 REV 14 04 08 Bom GODK DRESTER 120 USE and MAINTENANCE ENGLISH...
Страница 23: ...22 10 SPARE PARTS...
Страница 26: ...25 12 WIRING DIAGRAMS...
Страница 27: ...26 NOTES Page intentionally left blank...