![background image](http://html1.mh-extra.com/html/formax/cut-true-29a/cut-true-29a_programming-manual_2320000006.webp)
Incremental Mode - Repeating same Dimension on subsequent steps
Incremental Mode is used for manipulating the total finished cut size, not the sheet size
Touch here to input the value using
the on-screen keyboard
To move the back gauge in increments by the same dimension multiple times (forward or back), input this dimension by
pressing it on the screen and using the on-screen keyboard.
Confirm by pressing
enTeR
then press . The back gauge will automatically move into the chosen position.
It is possible to repeat the move by pressing . This process can be repeated multiple times.
Manual back Gauge Movement
The back gauge can be moved manually forward or backwards by pressing the arrows on the left of the screen:
To fine tune the back gauge position, use the black handwheel on the front: push and turn to adjust.
Paper eject
By pressing the button, the operator can easily remove the paper stack. The back gauge automatically moves
the paper forward by the given value then returns to its initial position.
2
Using an 8.5” x 11” sheet, to make a cut at the 7” mark,
enter 7 on the touchscreen. The back gauge will move to
7” and a cut can be made.
11”
8.5”
Cut made at the 7” mark
example: absolute Mode
example: Incremental Mode
Using an 8.5” x 11” sheet, to make a cut at the 3” mark,
enter 3 on the touchscreen. The back gauge will move to
3” and a cut can be made.
11”
8.5”
Cut made at the 3” mark,
repeated at 6” and 9” marks
Содержание Cut-True 29A
Страница 1: ...Cut True 29A 29H Guillotine Cutters PROGRAMMING MANUAL First Edition 11 2016...
Страница 2: ......
Страница 4: ......