To input the required dimension, press the dimension on the screen and input the value via the on-screen keyboard.
Confirm by pressing the
enTeR
button. The back gauge will move to the requested position. (See example, next page.)
Preparing for Programming
After turning on the cutter, the start screen appears:
Press the green button on the screen to start the machine control system
After pressing “Press to Calibrate” the cutter begins calibration
During calibration, the back gauge moves to maximum back position, then forward until the calibration sensor is detected.
When calibration is finished, the screen displays Manual Mode.
Manual Mode
Status Information
Touch here to select
Absolute Mode or
Incremental Mode
absolute Mode - automatically Moves to the Dimension based on sheet size
Touch here to input the value using
the on-screen keyboard
1
Содержание Cut-True 29A
Страница 1: ...Cut True 29A 29H Guillotine Cutters PROGRAMMING MANUAL First Edition 11 2016...
Страница 2: ......
Страница 4: ......