3.
Tap [OK] to save the job.
The job is added to the job list.
Run a Job
Before you run a job where sealing is required, make sure the
sealing liquid reservoir is filled.
From the home menu choose a job. The job information appears (see “
on page 9").
1.
2.
Load envelopes as specified in the job.
3.
Load the documents face up and trailing, as specified in the job. Place the address
carrier in feeder 1.
4.
Tap the [1x] button to start a test run. If you tap the [1x] button, the system helps you
to adjust the address position (see
on page 20).
5.
Tap the [Start] button to start the run. The system starts processing your mail sets.
6.
Tap the [Stop] button to stop the run. The system completes and inserts the current
set and stops. This results in a cleared system which is ready to process a new job.
3
English
19
| Page 19 | Jan-15-2019 03:21 | Working with Jobs