background image

Copyright 2017 Vestil Manufacturing Corp. 

 

Page 1 of 5 

 

  

 

 
 

                 

 

 

HDDL-55 Drum Lifter  

Instruction Manual 

 
 
 

 

 

 

 
 

 
 
 
 
 
 
 
 

 
 
 
 
 
 
 

 
 
 
 
 
 
 
 

 
 
 
 
 

 

Receiving instructions:  
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it 
sustained damage during transport. If damage is discovered, record a complete description of it on the 
bill of lading. If the product is undamaged, discard the packaging. 

 

NOTE: 
The end-user is solely responsible for confirming that product design, installation, use, and maintenance 
comply with laws, regulations, codes, and mandatory standards applied where the product is used. 

 

 

V

ESTIL 

M

ANUFACTURING 

C

ORP

2999 North Wayne Street, P.O. Box 507, Angola, IN 46703 

Telephone: (260) 665-7586  -or-  Toll Free (800) 348-0868 

Fax: (260) 665-1339 

www.vestilmfg.com    e-mail: 

[email protected]

 

 

Table of Contents 

Signal words…………………….………………………………………………………………………………….... 2 
Safe use recommendations….………………………………………………………..………………………....... 2 
Labeling diagram…………………………….……………………………………………………………………… 2 
Exploded parts diagram and bill of materials………..……………………………………….…........................ 3 
Specifications……………………………………………………………………….……………………………….. 3 
Using the lifter……………………………………………...………………………………………………………… 4 
Inspections & Maintenance………………………………………………………………………………………… 4 
Limited warranty……………………………………….………………………………………………………......... 5 

Summary of Contents for HDDL-55






Reviews: