“Sealing position”
In the supervisor
menu change the
settings of the
applicable envelope.
Sealing position is
not correctly set.
Envelope contents
is wet.
“Clean the System”
Clean the exit roller.
Exit roller is wet.
“Filling the Sealing
Liquid Reservoir”
Check water level,
refill if needed.
Water level low.
Flap not
sufficiently
moistened.
“Operator Mainten-
ance”
Check brushes,
replace if needed by
the extra soaked set.
Brushes dry.
“Operator Mainten-
ance”
Check brushes, clean
if needed.
Brushes dirty.
“Operator Mainten-
ance”
Replace brushes.
Brushes worn out.
-
Choose job with
envelope sealing.
The current job has
no envelope sealing.
“Envelope and Insert
Specifications”
Make sure the
envelope meets the
specifications.
Envelope does not
meet the
specifications.
-
Seal an envelope
manually to test the
adhesion quality.
Poor envelope
quality.
-
In the supervisor
menu change the
envelope settings.
Sealing position is
not correctly set.
48
| Page 48 | Jan-15-2019 03:21 | Fault finding
7
English
