![background image](http://html1.mh-extra.com/html/formax/c400i/c400i_manual_2320013044.webp)
Cleaning or Replacing Moistening Brushes
See
“Filling the Sealing Liquid Reservoir”
on page 31 for the location of the brushes.
Open the system.
1.
2.
Lift the sealing liquid reservoir with the blue handles carefully out of the system.
3.
Remove the three brushes.
4.
Clean the brushes with a small amount of water. If the brushes are worn, replace them
with new ones.
5.
Install the brushes.
6.
Fill the tray with sealing liquid.
7.
Make sure the brushes are moistened sufficiently.
8.
Replace the liquid reservoir.
9.
Close the system.
Clean the system
Open the system.
1.
2.
Clean the rollers. Use a cleaning product recommended by your authorized distributor
and apply it with a lint-free cloth. Wipe each rubber roller while turning it manually.
3.
Clean the casing of the system with a damp cloth and a slightly soapy solution.
42
| Page 42 | Jan-15-2019 03:21 | Operator Maintenance
6
English