WALL PANELS
Working in the back left corner, add the expanding
foam into the side groove of the Side Panel 1 (G)
and butt it up against Side Panel 2 (H). Have one
person holding onto the wall panel to prevent
movement.
37
37
There will be smaller Spline Panels (Q) that will
be in between the grooves of some panels. Add
expanding foam into each groove of the spline
panel and apply them according to the wall panel
layout. Secure with 5 x 35mm screws.
39
39
Pre-drill and screw through the Back Panel (H) Side
Panel (G) using 3 x 150mm screws (top, middle
and bottom).
43
43
Add expanding foam into the inner side groove
and into the bottom groove of the second Back
Panel (H) and knock into place to complete the
back wall.
41
41
Pre-drill and, using the star drill bit provided in
your fixing box, screw through the back into the
side wall panel using 3 x 150mm screws (top,
middle and bottom).
38
38
Slide the Spline (Q) into the First Panel (H). Please
note that Xtend2.5 only has 2 x back panels.
40
40
Install the right hand side panels as shown above
(N), adding the expanding foam into the bottom
grooves. Place and knock into the other side panel.
44
44
Repeat the same process for the right hand corner
(G). Add foam and knock into place. Ensure the
panel is flush to all edges as mentioned and shown
above.
42
42
11
