Section 6
APPLIANCES
Cooktop Piezo Ignition (Cont’d)
4. When the burner lights, adjust the surface burner control knob between
HI
and
LOW
to select the
desired flame size.
5. After cooking, turn the surface burner control knob to the
OFF
position.
If the Cooktop Piezo Ignitor is not functioning
• Be sure all controls are in the
OFF
position
• Hold a lighted match to the desired surface burner head (DO NOT turn the control knob ON and allow
gas to escape before lighting the match.)
• Push in and turn the surface burner control knob to the
LITE
position
• When the burner lights, adjust the knob between
HI
and
LOW
to select the desired size
• After cooking, turn the knob to the
OFF
position
WHEN YOUR AVIATOR IS NOT IN USE OR WHILE TRAVELING, TURN ALL
COOKTOP KNOBS TO THE OFF POSITION AND TURN OFF THE MAIN GAS SUPPLY.
NOTE: A DELAY IN THE TIME IT TAKES TO LIGHT THE PILOT MAY SIGNAL A
NEED
TO BLEED AIR FROM THE COOKTOP LP LINE
‘CAUTION’ INDICATES A HAZARDOUS SITUATION WHICH, IF NOT AVOIDED, COULD
RESULT IN VEHICLE DAMAGE OR MINOR TO MODERATE INJURY.
Notes:
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
_____________________________________________________________________________________
Page 71
Revised September 2012