3. Release the clamps that secure the air
filter cover to the air filter housing.
E174669
4. Carefully lift the air filter housing cover.
Remove the air filter element from the
air filter housing.
5. Install a new air filter element.
6. Replace the air filter housing cover.
Engage the clamps that secure the air
filter housing cover to the air filter
housing. Be careful not to crimp the
filter element edges between the air
filter housing and cover. Make sure
that the tabs on the edge are correctly
aligned into the slots.
7.
Slip the air tube onto the air filter cover
and firmly tighten the bolt on the air
tube clamp, but do not overtighten.
8. Reconnect the intake air temperature
sensor electrical connector to the
outlet tube. Make sure the locking tab
on the connector is in the locked
position.
ENGINE AIR FILTER - INFORMATION MESSAGES
Action
Message
Indicates the engine air filter is performing as expected.
Filter OK
Indicates that there is a higher than expected restriction
across the engine air filter, which could represent an air filter
at full useful life or a filter with an obstruction.
When this displays, inspect the engine air filter and replace
if necessary.
After the inspection or engine air filter replacement, you must
reset the system in order to change the status from Check
Filter to Filter OK.
Check Filter See Manual
Indicates that there is an error within the electronic air filter
maintenance minder system requiring service.
System Fault See Manual
ENGINE COOLING FAN - 3.5L
DURATEC/3.5L ECOBOOST™
WARNING:
Keep your hands and
clothing clear of the engine cooling fan.
Under certain conditions, the engine
cooling fan may continue to run for several
minutes after you switch your vehicle off.
381
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Maintenance
