Note:
This procedure is only for the 12 volt
battery.
Note:
Your vehicle has a 12 volt battery that
is under the driver seat. The 12 volt battery
controls the switches and contacts that
engage the high voltage battery. Do not
jump start the high voltage battery using a
standard 12 volt battery. Tow your vehicle
to an authorized dealer if the high voltage
battery does not accept a regular charge.
Note:
Do not attempt to push start your
vehicle. You could cause transmission
damage.
Note:
Do not disconnect the 12 volt battery
from your vehicle electrical system.
PREPARING THE VEHICLE
Use only a 12 volt supply to start your
vehicle.
Park the booster vehicle close to the hood
of the disabled vehicle, making sure the
two vehicles do not touch.
JUMP STARTING THE VEHICLE -
3.5L DURATEC/3.5L ECOBOOST™
Your vehicle has a positive (+) access
terminal and a negative (-) ground
connection point that you can access
under the hood, even though the actual
battery is under the driver seat. You can
jump your vehicle using these points.
The positive (+) access terminal is next to
the fuse box, under a red cap. To access
the positive (+) terminal, lift the red cap
up.
E145290
The negative (-) terminal is a post on the
driver side, near the hood hinge. It is a
ground connection point. You need to
remove the rubber covering first.
E183998
WARNING:
Make sure that the
cables are clear of any moving parts and
fuel delivery system parts.
Note:
In the illustration, the bottom vehicle
represents the booster vehicle.
350
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Crash and Breakdown Information
