9
Using the Remote Security & Convenience Functions (Con’t)
System Operation
When the Security System is Armed:
•
All interior entry points are monitored for unauthorized entry;
•
The Interior Theft Sensor monitors for impact to the vehicles body or glass;
•
The system status indicator flashes once every four seconds.
If any monitored entry point is opened or hard impact is detected, the system will
activate an alarm cycle. During the alarm cycle:
•
The horn sounds in a random pattern;
•
The parking lights flash** in a random pattern;
•
The system status indicator begins to flash rapidly.
*
“Press” refers to pushing a transmitter button for approximately one second.
**
See your dealer for details on available installation features and options.
Memory Seats**
If your vehicle is equipped with memory seats and/or functions, the memory
functions will be activated when you disarm the security system or unlock the doors
using the PowerCode remote control transmitter in the same manner as with the
factory equipped RKE keyfob.
Power Side Sliding Doors**
On vehicles equipped with Power Side Sliding doors, the driver side power sliding
door is controlled by pressing* the
1
button on the PowerCode remote control
transmitter. The passenger side power sliding door is controlled by pressing* the
2
button on the PowerCode remote control transmitter.
Note: Prior to activating the power sliding door with the PowerCode remote control,
all doors must be unlocked with either the PowerCode or factory transmitter.
Pressing the button the first time will open the selected door. Then pressing the
button again will close the selected door.
Power Rear Liftgate Operation**
On vehicles equipped with the Rear Power Liftgate option, the power liftgate is
controlled by pressing* the
2
button on the PowerCode remote control transmitter.
Pressing the button the first time will open the power liftgate, then pressing* the
2
button a second time will close the power liftgate.
Gen-2 Gold Owners, 1031555 RevA - TRANSLATED.pmd
6/14/2006, 2:45 PM
9
