5
Using the Remote Control Start Function (Con’t)
defroster for 10 minutes, or for the remainder of your vehicle’s preset run time limit.
Using the “Quick-stop” Feature:
If you want to make a short stop and leave your vehicle running (to keep the interior
warm or cool, for instance), the quick stop feature allows you to do this while
keeping your vehicle secure and your keys with you.
To engage quick stop:
1. Stop the vehicle and place the transmission in PARK.
2. With your foot off the brake pedal, press*
on the remote control. The parking
lights** will turn on and the doors will unlock, indicating that the vehicle is now
running via remote start.
3. Remove the keys from the ignition and exit the vehicle. Press*
to arm the alarm
system if desired.
Note: Do not leave children or animals unattended in the vehicle when
using the quick stop feature. For safety purposes on certain model
vehicles, the power windows and moonroof (if equipped) will be disabled
during Quick Stop mode.
Service/Valet Mode:
Service mode is used when servicing the vehicle to prevent the system from
unexpectedly starting the engine while being serviced. While in service mode, the
systems keyless entry functions will operate normally, but the security system will
not arm and the remote start function is temporarily disabled.
To engage the service/valet mode
, turn the ignition key to the ON (RUN) position
and press* the
2
button on the PowerCode remote control transmitter. The system
will begin flashing the dash mounted status indicator in a double-flash pattern
indicating that the system is in Service mode.
To return the system to its normal operating mode
, turn the ignition key to
the ON (RUN) position and press* the
2
button on the PowerCode remote control
transmitter again. The status indicator will shut off, indicating that the system is in
now in its normal operating mode.
Important Note:
When taking your vehicle in for service is recommended that you
inform the service personnel that your vehicle is equipped with a remote control
start system.
*
“Press” refers to pushing a transmitter button for approximately one second.
**
See your dealer for details on available installation features and options.
Gen-2 Gold Owners, 1031555 RevA - TRANSLATED.pmd
6/14/2006, 2:44 PM
5
