8
Activating Auxiliary Output Function 2**
To activate auxiliary output function 2 control, press* the
2
button on your
PowerCode remote control transmitter.
Remote Control Power Trunk/Hatch release**
Press and hold*** the
button on your PowerCode remote control transmitter. The
system will activate the power trunk or hatch release (if equipped) and disarm the
security system.
Note: Make sure to rearm the security system if you will be leaving your vehicle
unattended again after opening your trunk or rear hatch.
Remote Control Progressive Find function
The remote control vehicle find function can help locate your vehicle in a crowded
parking lot. Pressing* the
button on your PowerCode remote control transmitter
will chirp the horn 5 times. Subsequent presses* of the
button within 5 seconds
of first press will activate the find function again - sounding the horn slightly louder
on the second and third activations and then at a constant sound level (equal to the
third activation).
Remote Control Panic Mode
The remote control panic function helps draw attention to your vehicle and yourself
in a threatening situation. Press and hold*** the
button on your PowerCode
remote control transmitter to activate the panic function. Pressing* the
button on
the PowerCode transmitter prior to the end of the 30 second cycle will end the panic
mode.
Illuminated Entry and Exit
When the alarm system is disarmed, the vehicle courtesy lights will turn on for 1
minute, or until the vehicle is started or the system is rearmed.
When the ignition is turned off, the vehicle courtesy lights will turn on for 1 minute, or
until the system is armed.
Using the Remote Security & Convenience Functions (Con’t)
*
“Press” refers to pushing a transmitter button for approximately one second.
**
See your dealer for details on available installation features and options.
*** “Press & Hold” refers to pushing a transmitter button for more than one second.
Gen-2 Gold Owners, 1031555 RevA - TRANSLATED.pmd
6/14/2006, 2:44 PM
8
