Ford Falcon (FG) 2010, Руководство пользователя

Страница: 99 / 264

-99-
It is recommended that the dual zone
automatic climate control system
is left in AUTO mode at all times for
optimum driver and passenger comfort.
Sensors monitor cabin, ambient air
and engine temperatures. A sun load
sensor measures the strength of direct
sunshine on the interior of the vehicle.
A microcomputer constantly processes
this information and, with the climate
control in AUTO mode, uses it to closely
control the climate within the vehicle.
22°C is the recommended temperature
setting for most users. Driver and front
passenger have independent comfort
settings.
The temperature on either side of the
cabin may be adjusted up (to a limit
of 30°C) or down (to a limit of 18°C) if
required.
Note: The dual zone ACC has capability
of adjusting independent side to side
temperature only. Air distribution
mode and fan settings cannot be
independently adjusted between the two
sides of the vehicle.
Automatic operation
After starting the engine, if ’Off’ is
displayed on the Interior Command
Centre screen, press the AUTO button
to turn the system on.
Adjust the comfort level to the desired
temperature using the temperature
control buttons for either side of the
cabin.
Climate control
After starting the engine, if ’Auto’ is
displayed, the system will automatically
adjust to the selected comfort level
without any further assistance. ’Auto’
mode automatically controls air inlet, air
distribution, fan speed, air conditioning
and temperature.
From time to time it may be noticed that
the air distribution mode and fan speed
vary. This is the system’s normal method
of operation whereby it selects the
mode of air inlet, air distribution and fan
speed most appropriate to maintain the
selected comfort setting.
When starting the vehicle on a cold
day with a cold engine, air discharge is
delayed until the engine begins to reach
operating temperature. Simultaneously,
the blower fan speed will increase to
assist warm air circulation throughout
the cabin. As the interior air warms to the
preselected comfort setting, the mode
will be automatically selected to best
achieve the comfort level and the fan
speed will then decrease.
Similarly, during high cabin temperature
conditions the blower fan speed will
increase and the A/C will operate at
maximum performance to quickly
reduce the interior temperature.
The OFF button will turn the automatic
climate control system off but will allow
fresh air to enter the cabin through the
instrument panel vents.