Ford Falcon (FG) 2010, Руководство пользователя

Страница: 60 / 264

-60-
Lighting
Front fog lamps
1. Switch off the lights and allow to
cool.
2. Disconnect the wiring loom plug at
the connector socket.
3. Rotate the H11 bulb assembly
including connector socket through
¼ turn anti-clockwise (A) then pull
(B).
CAUTION
Hold the replacement Quartz
Halogen bulb with a clean cloth
or tissue to prevent contact with glass.
If the glass is touched, the skin’s natural
oils will contaminate the bulb. If touched,
wipe the bulb clean using methylated
spirits before installing.
A B
Rear lamps
Direction indicator, reverse, tail
and brake lamp
Note:
The brake light and rear light
share one light bulb with two filaments.
1. Open the boot lid.
2. Remove the scrivet and pull back
the boot trim to reveal the three nuts
retaining the light assembly cluster.
3. Remove the three retaining nuts.
4. Remove the light assembly cluster.
5. Unscrew the bulb holder to remove
the bulb.
A Reverse lamp bulb
B Direction indicator bulb
C Tail and brake lamp bulb
Note: The pins on the tail and brake
light bulb body are offset and will only
allow insertion one way. Do not try to
force the bulb into the holder and ensure
that the pins are correctly aligned with
the corresponding grooves in the bulb
holder.
6. Insert the replacement bulb and
replace the bulb holder.
7. Replace the light assembly cluster.
8. Replace the three retaining nuts.
9. Replace the trim and scrivet.
A
B
C