Ford Falcon (FG) 2010, Руководство пользователя

Страница: 100 / 264

-100-
Climate control
Semi-automatic operation
If desired, you may override the
automatic control system and operate
some features manually (such as fan
speed and air distribution). Manually
selecting such features when in ’Auto’
mode will change the system to ’Semi-
auto’. Full automatic control can be
resumed at any time by pressing the
’Auto’ button. Optimum comfort can be
best achieved in AUTO mode.
Dual zone temperature control
Dual zone temperature control allows
the driver and front passenger to set
independent air temperatures according
to personal preference.
The temperature may be adjusted for
each side by pressing the temperature
control button in the appropriate
direction until the desired temperature is
achieved.
The selected temperature for either side
will be displayed on the corresponding
side of the Interior Command Centre
screen. The temperature for either
side can be set between the range of
18°C and 30°C, in 0.5°C increments. If
a temperature below 18ºC is selected,
then ’LOW’ is displayed. If a temperature
above 30ºC is selected, then ’HIGH’ is
displayed.
The automatic temperature control may
be overridden by selecting ’H’ (HIGH) or
’C’ (LOW) from the driver temperature
setting button. This action will cause the
passenger set temperature to match
the driver’s selection of ’H’ (HIGH) or ’C’
(LOW).
Selection of ’H’ (HIGH) will set and hold
the air temperature to maximum heating
for both driver and passenger.
Temperature adjustment by the
passenger button is not possible while
the driver has selected ’H’ (HIGH) or ’C’
(LOW).
Selection of ’C’ (LOW) will set and hold
the air temperature to maximum cooling
for both driver and passenger.
The passenger is unable to choose a
different setting until the driver’s setting is
no longer ’H’ (HIGH) or ’C’ (LOW).
Note: Cabin comfort level may not be
maintained when ’H’ (HIGH) or ’C’ (LOW)
is selected for extended periods.
Dual zone temperature linking
Dual zone temperature control
linking occurs when the passenger
temperature automatically follows the
driver’s temperature setting.
Linking is activated by any one of the
following conditions:
• Pressing and holding the AUTO
button for at least 2 seconds.
• Driver selects ’H’ (HIGH) or ’C’
(LOW).
• If the driver and passenger
temperature settings are identical
prior to switching the ignition key
OFF.