Ford Falcon (FG) 2010, Руководство пользователя

Страница: 59 / 264

-59-
5. Remove the bulb from the holder by
pulling it outwards.
6. Insert the replacement bulb into the
holder and replace the holder back
into the headlight housing by turning
clockwise ¼ of a turn.
Side repeater
1. Turn the front wheel outward.
2. Remove the 4 scrivets and peel
splash shield back.
3. Remove the bulb holder by turning
anti-clockwise 45 degrees.
4. Remove the bulb from the holder by
pulling straight out.
5. Replace the bulb and bulb holder.
6. Secure the splash shield.
Side repeater (external mirror
mounted)
CAUTION
It is recommended that this
procedure is carried out by your
Authorised Ford Dealer.
Lighting
4. Reach into the gap and locate the
turn signal connector. Turn the bulb
holder 1/8 turn anti-clockwise to
release.
5. Remove the blown bulb by gently
pressing the bulb down and turning
it anti-clockwise.
6. Insert the amber replacement bulb
and replace the bulb holder, turning
1/8 turn clockwise to secure.
7. Replace the splash shield and insert
the scrivets.
Parking lamps
1. Switch off the lights and allow to
cool.
2. Open the bonnet.
3. The bulb holder is located above the
high beam unit. It is not necessary to
disconnect the electrical connector.
4. Gently rotate anti clockwise ¼ of a
turn and pull the bulb holder from
the rear of the headlight housing.