Ford Falcon (FG) 2010, Руководство пользователя

Страница: 131 / 264

-131-
Parking aids (where fitted)
Adjusting the reverse sensing
system warning beep volume
To adjust this feature using the
ICC (see also Interior Command
Centre section):
1. Press the Menu button
2. Select “Audio” from main menu
3. Select “Options” from Audio menu
4. Select “Media Volume” from Options
menu
5. Select the Sonar slider and use
the volume control knob to slide
between -10 and +10.
6. Use the Back button to cycle back
to the main screen.
Note: Whilst the volume can be
reduced, for safety reasons it cannot be
totally switched off.
REVERSE CAMERA SYSTEM
(where fitted)
WARNINGS
The reverse camera is an auxiliary
system that is not intended to
relieve the driver of their responsibility for
exercising due care and attention when
reversing.
The reverse camera system must
not be used to replace head
checks and mirrors when reversing your
vehicle.
The camera is mounted within
the appliqué on the decklid and
should not be used as a device to
lift or close the boot.
The purpose of the reverse camera
system is to provide a view of the driver’s
blind spot at the rear of the vehicle which
is not seen using head checks or mirrors.
Provided the vehicle ignition system is
on, the system is initialised approximately
two seconds after reverse gear is
selected. The current ICC display will
be replaced by a real-time image of
whatever is in the field of view of the
reverse camera.
Always keep the camera lens free from
dirt, snow and ice (do not clean with
sharp or abrasive objects). Mild soap and
warm water should be used for cleaning
purposes.
Note: If the vehicle’s decklid is
damaged, rendering it misaligned or
bent, the reverse camera may be
affected. Should this be the case,
please have the system checked by an
Authorised Ford Dealer.
Warning: Check your surroundings