TIRES
Tire Inflation Information
WARNING:
Always maintain your tires in good condition.
Frequently check and maintain correct inflation pressures as
specified by tire manufacturers. Inspect periodically for abnormal wear
patterns and repair/replace cut or broken tire casings. Always use
experienced, trained personnel with proper equipment and correct
procedures to mount or remove tires and wheels. Failure to adhere to
these warnings could result in wheel or tire malfunction, damage to
your vehicle, personal injury, or death.
WARNING:
To avoid personal injury or death, always follow
these instructions when mounting radial tires on wheels:
•
Only personnel that have had proper training and experience should
mount or remove tires from rims or wheels.
•
Use only heavy-duty rims or approved rims for radial tires. It may be
necessary to contact your wheel and rim distributor to determine if
you can use radial tires with your rims.
•
If you are using a tube, make sure to use special radial tire tubes
because of the increased flexing of the sidewalls on radial tires.
•
Never use anti-freeze, silicones, or petroleum-based lubricants when
mounting radial tires. Make sure to use only an approved lubricant as
an aid for mounting tires.
•
Always inflate tires in a safety cage.
•
Do not attempt to mix stud piloted wheels or fasteners with hub
piloted wheels or fasteners. To do so may cause premature wheel
failure resulting in property damage, personal injury, or death.
•
Do not mix foreign (not made in North America) wheel-mounting
parts with domestic (made in North America) parts. Many foreign
wheel components look similar to, but are not the same as domestic
made components. Mixing components could cause wheel or fastener
failures and result in property damage, personal injury, or death.
Wheels and Tires
243
2015 F-650/750
(f67)
Owners Guide gf
(ownloose)
, 1st Printing, December 2013
Canadian_French
(fr_can)