We do not recommend, or approve, performing axle conversions.
However, we understand that, on occasion, others install aftermarket
add-on axles on the truck chassis that allow operator control for weight
transfer from other axles (such as air lift axles).
TWO-SPEED REAR AXLE (IF EQUIPPED)
WARNING:
Never shift a two-speed axle when descending a
steep grade as this may cause loss of vehicle control and result in
personal injury.
Note:
Do not shift between ranges when the speed control is on.
A two-speed rear axle allows the
driver to select a low range for
greater pulling power and a high
range for greater road speed and
fuel economy. You can also use
these ranges to provide extra steps
between transmission shifts when
driving on steep grades or fuel
economy may be factors.
Axle Shifting with a Manual Transmission
To downshift, select the next lower gear, release and press the
accelerator pedal rapidly, or while holding the accelerator pedal down,
release and engage the clutch rapidly.
Note:
Use the clutch method
when driving at slower speeds.
To upshift, keep the accelerator pedal down, select the next higher gear,
release the accelerator and pause until the axle upshifts.
Note:
De-clutch for smoother axle upshifts when driving at slower speeds.
Axle Shifting with an Automatic Transmission
Note:
You cannot split-shift with an automatic transmission. In addition,
downshifting above 40 mph (64 km/h) may result in transmission or axle
damage.
Note:
Do not shift the axle to LOW with your vehicle is moving.
Use LOW when you drive a fully loaded vehicle on a severe grade or in
congested traffic. Press the upper portion of the switch.
Use HIGH for all normal driving conditions with a lightly loaded or
partially loaded vehicle. Press the lower portion of the switch.
2SPD
LOW
HIGH
136
Transmission
2015 F-650/750
(f67)
Owners Guide gf
(ownloose)
, 1st Printing, December 2013
Canadian_French
(fr_can)